TFT Configuration Software from Display Technology Ltd

Products
TFT Display Modules

Standard TFT Display Components

High Bright TFTs

High Resolution TFTs

Stretch TFTs

FHD Panels

4K UHD Panels

Touch Display Panels

Compact Panels

IoT Compact Panels

Transflective Panels

Transparent Panels

EMI Shielded TFT Displays

Browse TFT Products
Industrial Monitors

Open Frame Monitors

Monitors up to 24"

Monitors from 27"

Monitor Customisation

Stretch Monitors

Touch Monitors

Fireload Optimised Displays

High Bright Monitors

Video Wall Monitors

Web Poster Displays

4K UHD Monitors

E-Paper Displays
Touch Screen Components

Touch Screen Controllers

PCAP Touch Screens

Resistive Touch Screens

Infinite Touch

Hover Touch

TFT Controllers

Artista / Raspberry Pi Controller

Industrial Media Players

LED Backlight Drivers

Prisma AD Video Cards

Configuration Software

Kit Solutions

with ARM Raspberry PI

with TFT Controller

with Embedded SBC
Embedded Computing

Single Board Computer (SBC)

System on Module

Panel PCs

Mainboards

Industrial PC

Power Supplies & Accessories

Power Supplies

Interface Boards

Sensors

Cable Harness

Components & Transformers

Components

Transformers

PCB Assembly
Services
Market Sectors
Case Studies
Demonstrations

Customer Setup Software

We have developed two versions of our software for easy configuration of our TFT controller boards depending on which chipset is being used. MarsRover and Chandler Rover.

This allows our system integrator partners to have flexibility in programming the boards to their own settings, it enables the programming of the boards for displays we do not support, and allows for base board stocking.

The sofwtare is MS windows based, and has been designed to be user friendly simply by inserting the correct parameters from the panel spec into the appropriate sections pof the software and board flashing through a serial port.

MarsRover software for Prisma-IIIA and PrismaMOBILITY-II
ChandlerRover software for PrismaMEDIA-Eco, PrismaECO-eDP and PrismaECO-IV

Configuration Software (large)

For more information on our Configuration Software please contact us today on 01480 411600 to see how we can help you find the perfect display solution.

Board features

LVDS timing (with spread spectrum for increased EMI performance)
Power Sequencing (T-CON, BLU, PSU remote signal on screw terminal)
T-CON supply voltage is configurable for 3.3V / 5.0V or 12V
Backlight unit (BLU) control (ANA/PWM, 3.3V/5V min/max, with pixel dimming)
Adjustable LVDS option pins (e.g. for reverse scan, JEIDA/VESA mapping, H/L, 3.3V or 5V level)
Configuration can be saved as XML file for future use
OSD setup and user data can be saved and re-used
Firmware and EDID can be updated easily
Operation hour counter (analyzable separately for display and backlight)
The user can chose the active input interfaces (for shorter switching periods when searching for an input source)

New MarsRover Software Features

Panel Configuration

LVDS channel swap

Board Configuration

Enable SOG (Sync On Green) on VGA port
4-/6-Button Keypad selection
2 custom modes for special timings can be defined

Contact FORTEC UK

If you have any questions about our product range, or wish to speak to a member of our team about your requirements. Please contact us using this form, or via our Contact Us page.

View Saved Products