T-51512D121J-FW-A-AFN

		SVGA (800x600) resolution TTL interface T-51512D121J-FW-A-AFN is an Optrex 12.1" TFT display. Owing to the long CCFL half life of 50,000 hours it is ideally suited for industrial applications. Its high brightness of 400 cd/m² provides a good readability even in difficult lighting conditions. Apart from the interface this display is identical to the T-51756D121J-FW-A-ACN with LVDS interface, XGA resolution and slightly lower brightness.

Order No. OP-01-065		Accessories
Size 12.1" Resolutions SVGA, 800x600 Brightness 400 cd/m² Contrast 500 typ. Viewing angle v/h 120°/130° Backlight CCFL 50.000 hrs. (min) Interface 3x6 bit TTL Temperature rangeTop / Tst -20°C..70°C / -20°C..+80°C Supply voltage 3.3 Volt Dimensions (H/V/D) 280.0/210.0/12.0 mm (typ.)		Product Name/Features Order No. PDF Backlight Inverter PS-0308-021, 12V+ dimming ZU-01-097R1.1 Inverter cable 30cm, open ends ZU-05-333 Backlight Inverter PS-M06D12S5-NJ4L-048, 12V, no dimming IN-00-008R1.1 Inverter cable 35cm with open ends KA-04-019 Touch Screen DMC AST-121, 12.1" 4-wire analogue resistive TO-05-006 Touch Screen DMC FST-T121, 12.1" 5-wire analogue resistive TO-05-024

Due to the consistent product strategy of Optrex this display is highly qualified for the usage in long-term industrial applications.

Standard-Kit solutions with...

Our standard kit solutions are already tested systems, ready to connect and even mounted if desired. For a perfect image qualitity and image position on the TFT screen our kit solutions include the corresponding cables, interfaces if needed and the fitting graphics BIOS.
Further Kit solutions are available on request.

RGB Converter board - analogue control

Order No. RGB Controller Board Features KI-30-149 PRISMA II RGB/DVI/Video

System solutions with the RGB converter board"PRISMA" include all components for building up a complete TFT display monitor.

Power Supplies