You are here: Display Technology » Components » TFT Controller Boards » RGB Converter Boards » PrismaMEDIA II
PrismaMEDIA IIHigh-tech Multimedia performance!
3G SDI (Serial Digital Interface; on board option; Supported Video Std. up to SMPTE 424M / 1080p)
HDMI1.3a-Interface with HDCP and the interface of the future: DisplayPort
Picture in Picture (PIP, also (partial)transparent) and PicturebyPicture
Supports resolutions up to 1920x1200
1080p for 2xHDMI, 2xDVI, VGA/RGB,
Display Port
supports PSU power save function
Power supply Vcc = +12V or +24V (with 24V inverter)
Audio (HDMI Audio and direct connection of 2 loudspeakers)
PrismaMEDIA II is a high-capacity multimedia converter board, optimised for digital signage and broadcast applications. It provides state-of-the-art features and is still cost effective!
Order No. PR-0xx-2 x xxx
Input interfaces
RGB analog (CRT)
HDMI1.3a/DVI and DisplayPort
2 x S-Video
2 x CVBS (up to 6 possible)
1 x component Video
CCIR
Output interfaces
Single/dual LVDS 18/24 Bit
(conventional/non-conventional)
Resolution max.
1920x1200 / 1080p
Supported Displays
10, 8 or 6-bit Panels
Scaler Chip
ST Mars
Scaling
user defined scaling
OSD (On screen display)
Auto adjust or menu adjust
Auto-detect /Auto-config
Identification of input format, all VESA modes
Optional Features
SDI, Test-Overlay, IR Remote
Power supply
12V or 24V
Optimal for use in
Multimedia applications, Broadcast
Please consider:
Prisma converter boards are only available in connection with a TFT display since control cards and controller boards for TFT displays must be adjusted or configured to the TFT display. This applies to the adjustment of the jumper as well as to the BIOS software.
