Display Technology flatpanel systems and solutions
 
NewsletterGeneral termsSitemapImprintPrivacy Policy
Direct Call: +44 - 1634 - 29 55 55

You are here: Display Technology » Components » TFT Controller Boards » RGB Converter Boards » Prisma III

Prisma III Industrial performance, optimized for green IT
100% mechanically compatible to Prisma II

Prisma III
Input : RGB, DVI/HDMI (HDCP), S-Video, CVBS, Component, CCIR
. Picture in Picture (PIP, also (partial)transparent) and PicturebyPicture
3D filter at Video inputs
Supports resolutions up to 1920x1200
Operating temperature range -20°..+70°C
Green IT: supports PSU power save function and 0.5W switch-off consumption
RS232 and I²C interface
PWM and analog control of inverter
Power supply Vcc= +12V or +24V (with 24V Inverter)

optional:
power saving ambient light sensor

Data Sheet
Request Product

Prisma III
is a RGB/Video Converter, optimised for industrial or multimedia applications.
It provides state-of-the-art features and a wide range of special functionalities and characteristics – and is still cost effective!
 

Order No. PR-01-31x

Input interfaces RGB analog (CRT)
DVI/HDMI (HDCP)
2 x S-Video
1 x CVBS (up to 6 possible)
Component Video
CCIR
Output interfaces TTL or single/dual LVDS 18/24 Bit (conventional/non-conventional)
Resolution min./max VGA ~ WUXGA (640x480 ~ 1920x1200)
Supported Displays 10, 8 or 6-bit Panels
Scaling user defined scaling
OSD (On screen display) Auto adjust or menu adjust
Auto-detect /Auto-config Identification of input format, all VESA modes
Optional Features Remote Control via RS232, text overlay, control of external devices via OSD function
Power supply 12V or 24V
Optimal for use in Industrial and multimedia applications


Please consider:

Prisma converter boards are only available in connection with a TFT display since control cards and controller boards for TFT displays must be adjusted or configured to the TFT display. This applies to the adjustment of the jumper as well as to the BIOS software.
 

Special Features:

Ambient Light Sensor PDF
User defined configuration of each input interface
User defined scaling
PSU function: if the Prisma does not receive a signal for a certain period it switches to sleep mode and sends a signal to the power supply which switches to sleep mode as well; this saves energy and costs
Picture-in-picture (PIP) and
Picture-and-Picture (PAP)
Infrared remote control
Flash software under WIN XP
OSD via 6-button or opto rotary encoder
Prisma boards overview

Versions:
Versions with different outputs as e.g. single LVDS/Dual-LVDS, conventional/non-conventional data mapping and TTL/LVDS are defined by different firmware.
All versions are equipped with frame buffer!


printable version