You are here: Display Technology » Components » TFT Controller Boards » RGB Converter Boards » PRISMA II

PRISMA II Multimedia performance at a favourable price!

	Component video input
	Supports resolutions up to WUXGA (1920x1200)
	Improved video quality and better deinterlacing
	Improved auto-adjust functionality
	Advanced HM-interface optional
	Power supply optional up to 24Volts
	Different versions easily defined by the firmware
	optional: power saving ambient light sensor

PrismaII is a next generation development of our standard RGB/Video Converter board PRISMA and is optimised for multimedia applications. It provides state-of-the-art features and a wide range of special functionalities and characteristics – and is still cost effective!

Order No. PR-01-1xx

Input interfaces

RGB analog (CRT)
DVI
S-Video
Composite Video
Component Video

Output interfaces

TTL or single/dual LVDS 18/24 Bit (conventional/non-conventional)

Resolution min./max

GM1501:
VGA	~	WXGA / SXGA
640 x 480	~	1366 x 768 / 1280 x 1024
GM1601:
VGA	~	WUXGA
640 x 480	~	1920 x 1200

Supported Displays

8 or 6-bit Panels (with Dithering)

Scaler Chip

Genesis GM1501, GM1601

Scaling

user defined scaling

OSD (On screen display)

Auto adjust or menu adjust

Auto-detect /Auto-config

Identification of input format, all VESA modes

Optional Features

Tiling, Remote Control via RS232, (Image Flip), Advanced HM-Interface

Power supply

12V, optional up to 24V

Optimal for use in

Multimedia applications

Special Features:

Ambient light sensor
User defined configuration of each input interface
User defined scaling

Picture-in-picture (PIP)
Infrared remote control
Zoom and Pan

Versions:
Versions with different outputs as e.g. single LVDS/Dual-LVDS, conventional/non-conventional data mapping and TTL/LVDS are defined by different firmware.
All versions are equipped with frame buffer!

User's Manual for PrismaII OSD

Please consider:
PRISMA converter boards are only available in connection with a TFT display since control cards and controller boards for TFT displays must be adjusted or configured to the TFT display. This applies to the adjustment of the jumper as well as to the BIOS software.