RGB/Video/DVI/HDMI Converter Board PRISMA

		The PRISMA converter board series enables TFT displays to be connected to standard graphics interfaces. Input signals like analogue RGB, analogue video, DVI or HDMI are thereby converted into a TFT display conform TTL or LVDS signal. Besides the conversion of signals, PRISMA boards are scaling the input signal to the appropriate TFT resolution if needed. Apart from scaling the scaler chip offers an OSM (On-Screen-Menu) that enables the user to make personal settings like adjusting the brightness, auto adjust, etc.

Members of the PRISMA-family: Comparison table
	PRISMA II A powerful converter board for industrial applications (also 24V operation) with additional video input interface, improved video functionalities and a variety of new possibilities.
	PRISMAeco II This version is based on Prisma II but has no Video, just RGB and DVI.
	PRISMAeco Slim The most space and absolutely cost saving member of the PRISMA converter board series with one RGB analogue (CRT) input interface and one LVDS output interface.
	PRISMA II ruggedized The industrial version of the PRISMA II family with extended temperature range and wide input voltage range.
	PRISMA Media A powerful HDMI/DVI converter board with full HD (1920x1080) support.
	Please consider: PRISMA converter boards are only available in connection with a TFT display since control cards and controller boards for TFT displays must be adjusted or configured to the TFT display. This applies to the adjustment of the jumper as well as to the BIOS software.

PRISMA converter boards are developed and produced by Distec GmbH. For our in-house developments we ensure:

	Long term availability
	Product steadiness
	Compatibility of subsequent products concerning design, integration and function
	Technical support

Regarding EMC compatibility and interference resistance the design of the PRISMA II family is EN55022 and
DIN EN61000-6-2 oriented.

All PRISMA converter boards support TFT displays with 6-bit, 8-bit and 10-bit colour depth. Via Auto-detect/Auto-config function all analogue RGB signals are automatically detected and displayed optimally on the flat panel. For an easy handling and mounting the buttons for the on-screen-menu are integrated on the top of the PRIMA boards. However they can as well be fitted on the bottom side.

An external OSD board is optionally available for all PRISMA converter boards.
At PRISMA II the OSD can be controlled remotely over RS232 and due to its picture-in-picture (PIP) and picture-by-picture (PBP) function 2 images can be displayed at the same time: